Stepper Motor Nema 23 (178.4oz.in) - For X and Y X-35 Rails

€ 13.00

4.8
(236)
In Magazzino
Descrizione

Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires This motor is for the X rails or Y rails of a X-35 rail varient. THIS ITEM DOES NOT WORK AND IS NOT NEEDED FOR ELITE MACHINES
Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires This motor is for the X rails or Y rails of a X-35 rail varient. THIS ITEM DOES NOT WORK AND IS NOT NEEDED FOR ELITE MACHINES

Nema 23 Bipolar 1.8deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires This motor is for the X rails or Y rails of a X-35 rail varient. THIS ITEM

Stepper Motor Nema 23 (178.4oz.in) - For X and Y X-35 Rails | Onefinity USA

Higher Torque 1.26Nm(178.4oz.in) holding torque NEMA 23 bipolar 2.24x2.24x2.2 4-wire 1.8 deg. step angle(200 steps/rev) Rated current 2.8A

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

NEMA 23 External Ball Screw Linear Stepper Motor 4.0A 75mm Stack Screw Lead 2mm(0.07874) Lead Length 200mm - 23E30S4004BAL5-200RS

Nema 23 stepper motor with 8mm shaft 2.4Nm(339.79oz.in) Holding Torque Nema 23 motor driving voltage is 24-48VDC, suggest 36 VDC *Rated Current/phase

STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires

Nema 23 Stepper Motor 3.5A 600oz in. & 18/4 Prebuilt Double Shield Motor Cable

3 Axis CNC Controller Kit Nema23 Stepper Motor 175 Oz-in M335 Motor Driver 3.5A

STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires : Industrial & Scientific

3 Axis CNC Controller Kit Nema23 Stepper Motor 175 Oz-in M335 Motor Driver 3.5A

Nema23 23HS5628 4 Lead Nema 23 Stepper Motor 57 165 Oz-in 56mm 2.8A 6.35

【Model】23HS8430 【High torque】270oz-in 180N.cm holding torque 【Size】57x57x76mm (2.24x2.24x2.99) 【Advantage】Made of high-quality motor steel, tough

Nema 23 Stepper Motor 76mm 270oz.in 3A CNC Hybrid 2 Phase High Torque Stepping Motor 180Ncm 4 Lead for CNC Router XYZ Axis Milling Engraving

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.2Nm(169.93oz.in).

STEPPERONLINE NEMA 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

Chercher - 1

OnefinityCNC

Stepper Motor Kit

Stepper Motor Kit