Carbon Fiber PETG - Pro Series Filament - 3DMaker Engineering
Perfect balance of strength and toughness.
We took our PETG filament to the next level by adding 20% chopped Carbon Fiber. If your design requirements are demanding you will love our proprietary Carbon Fiber PETG blend!
Filament Properties:
Hotend Temperature (°C): 220-250 (Recommended: 225)
Bed Temperature (°C): 75-85 (Recommended: 80)
Filament Diameter (mm): 1.75±0.05
Net Weight: 1kg (2.2 lbs)
Build Surface: Polypropylene or PEI
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend starting with the following settings:
Default Print Speed: 30-60 mm/s (Recommended: 40 mm/s)
First Layer Height: 0.28 mm*
First Layer Speed: 15 mm/s
Extrusion Width: 0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
Retraction: Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
Perimeter Print Speed: 70% of Default Print Speed
Infill and Support Print Speed: 80% of Default Print Speed
Fan Profile:
Layer 1: 0%
Layer 3: 25%
Layer 5+: 50%
XY Jerk: 8
Z Jerk: 0.3
E Jerk: 5
Acceleration (Print/Travel): 300
Retract Acceleration: 1000
Travel Speed (non-print moves): 120 mm/s
Additional Notes:
Our Carbon Fiber PETG is packed with carbon fiber so we do not recommend printing with a nozzle size less than 0.4mm to prevent clogging (0.6mm or bigger is ideal)
Most users who are used to printing PLA tend to set their first layer height too low. PETG tends to build-up on the nozzle during the first layer causing adhesion issues. We recommend a first-layer thickness of 0.28mm.
Parthenon Gray Marble PRO Series PETG Filament - 1.75mm (1kg)
Carbon Fiber PETG Filament 1.75mm, TINMORRY PETG-CF 3D Printer Filament, Compatible with Bambu FDM 3D Printer, 1 KG 1 Spool, Blue : Industrial & Scientific
PRO Series Carbon Fiber PETG Filament - 1.75mm (1kg)
PETG Filament 3D Printer Manufacturers - Airwolf 3D
SA Filament PLA 1.75mm, 1kg, Transparent Black – DIY Electronics
eSUN PETG ReFilament 1.75mm, Black, Refill Spools
Parthenon Gray Marble PRO Series PETG Filament - 1.75mm (1kg)
FlashForge PETG Carbon Fiber (PETG-CF) Filament 1 KG – FlashForge USA
SainSmart Carbon Fiber PETG Filament is super-strong, perfect for printing items that require added strength. It’s more abrasive than standard PETG, providing higher rigidity and strength. With its toughness, wear resistance, and tear resistance, this filament is built to last.
Carbon Fiber PETG 3D Printing Filament | 1.75mm 1kg | SainSmart Pro-3 Series Black / Canada
MatterHackers PRO Series PETG 3D printing filament is an exceptionally tough and sturdy material that is a terrific general-purpose additive
PRO Series Carbon Fiber PETG Filament - 1.75mm (1kg)