PoE Splitter Power Over Ethernet Adapter Active 48V to 12V – RoboticsDNA
Specifications: Output port adapter: RJ45 male and male DC jack 5.5*2.1mm Data rate: 10/100Mbps Power Input: DC48V Power Output: DC12V 2A Data Output Port: RJ45 Male Devices will be detected before…
【★ POE Splitter Adapter】splits a PoE signal into an 12V 1A-2A DC power and 10/100Mbps ethernet data source, and use it with power supply equipment
PoE Splitter 48V to 12V, Active POE Splitte Over Ethernet Splitter Network Adapters, IEEE 802.3AF Compliant 10/100Mbps, DC 12V Output, for
Output Power: 12v/1A 15.4W, full IEEE 802.3af compliant Input Power Voltage: DC 48-57V standard POE switches,overvoltage protection Data Rate
Active PoE Power Over Ethernet Splitter Adapter 48V to 12V 2Amp
🔌POE Splitter Adapter Support international standard IEEE802.3 af; POE port supports 10/100/1000Mbps data transmission. Transmission rate
PoE Splitter Adapter Ethernet Adapter 48V to 12V, in line with 10 / 100Mbps PoE IEEE 802.3af Separator Having 12V Output for Surveillance Camera(Pack
Output Power: 12V/1A, 15.4W, full IEEE 802.3af compliant. Widely use with most 12-volt devices. Input Power Voltage: DC 44-57V standard POE switches,
Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP
【★ POE Splitter Adapter】splits a PoE signal into an 12V 1A-2A DC power and 10/100Mbps ethernet data source, and use it with power supply equipment
PoE Splitter 48V to 12V, Active POE Splitte Over Ethernet Splitter Network Adapters, IEEE 802.3AF Compliant 10/100Mbps, DC 12V Output, for
Active POE Power Over Ethernet Splitter Adapter 48V to 12V POE Splitter injector
Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP and VoIP Phone, up to 100m, 2 Pack : Electronics
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one cable, and then separates the data (Ethernet) and power (+12VDC regulated) into two different lines for non-PoE devices.
adafruit-802.3af PoE Output Data & Power Splitter - 5/9/12v ADA3239
PoE Splitter Power Over Ethernet Adapter Active 48V to 12V – RoboticsDNA
POE Splitter Adapter 12V, Active Power Over ethernet Splitter 48V to 12V, IEEE 802.3af/at Compliant 10/100Mbps up to 100 Meters for Surveillance Camera CCTV and Wireless AP, 2-Pack : Electronics