Polymaker PolyLite ABS 1.75mm 1KG roll Light Blue – Fabreeko

PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. Which 3D printer can print PolyLite™ ABS? Depending on the size of the models you are trying to

• PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.

  Which 3D printer can print PolyLite™ ABS?
  

  Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber.
  

  In general, a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will require an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+).
  

  Using proper bed adhesion can also help printing larger parts without deformation/warping issue.
  We can recommend Magigoo or Honeybadger PEI as adhesive and bed surface options.

  Printing Settings?

  
  

  Printing Temperature: 245˚C - 265˚C
  Bed Temperature: 90˚C - 100˚C
  Printing Speed: 30mm/s - 50mm/s
  Fan: OFF
  
  Direct Drive:
  Retraction Distance: 1mm
  Retraction Speed: 20mm/s
  Indirect Drive:
  Retraction Distance: 3mm
  Retraction Speed: 40mm/s
  
  Drying Settings: 70˚C for 6h
  (Only if the material has absorbed moisture)

PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. Which 3D printer can print PolyLite™ ABS? Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber. In general, a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will require an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+). Using proper bed adhesion can also help printing larger parts without deformation/warping issue.We can recommend Magigoo or Honeybadger PEI as adhesive and bed surface options. Printing Settings? Printing Temperature: 245˚C - 265˚CBed Temperature: 90˚C - 100˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 70˚C for 6h(Only if the material has absorbed moisture)

Sovol SV-06 – Fabreeko

Polymaker Malaysia, polymaker polysher

Cookiecad Mermaid PLA Filament 1.75mm 1kg – Fabreeko

UV resistant weather resistant 3D printer filament, Diameter Accuracy: 99% is within ± 0.03mm, Nozzle Temperature: 240℃ - 260℃, We recommend printing

Polymaker PolyLite ASA 1.75mm 1KG roll Blue

Collections – Fabreeko

Excellent Compatibility: A 1.75 mm PLA filament compatible with Makerbot, FlashForge, Monoprice, XYZprinting, ALUNAR, and other popular

Polymaker PolyLite PLA Black 1kg

Waht is it, one of the best filament dryers available at this time, the Sunlu S2 has a high temperature rating (70c) and heat recirculation for a more

Sunlu S2 filament dryer for ABS/ASA/PLA/PETG

Polymaker Malaysia, polymaker polysher

Cookiecad Mermaid PLA Filament 1.75mm 1kg – Fabreeko

The eSUN PETG filaments are stronger than regular PLA, having similar properties to that of ABS without common print issues that come with it. It also has no wire-drawing problems meaning the surface of the printouts will be smoother and more delicate. A low material shrinkage rate gives a uniform diameter and no cracking or brittle issues.

eSUN 1.75mm Gray ABS+ 3D Printer Filament 1kg Spool (2.2lbs) Gray

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.

eSUN 1.75mm ABS+ Blue Filament - 1kg Spool