Esun PLA - LW Light Weight 3D Printer Filament 1kg 1.75mm

Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA
Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight as much as possible can greatly improve the performance of the airplane. Product features:Low density, up to 0.54g/cm3The foaming volume ratio is 220%, and 1 roll of ePLA-LW is equivalent to 2.2 rolls of ordinary PLAFree adjustment of strength and foaming ratioExcellent surface effect, matte and delicateGood adhesion between layers, resistant to explosion and easy to repairEasy to paint, strong surface paint adhesionExcellent printability, large models do not warp, do not block, and do not need a constant temperature chamber

ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD,

eSun ePLA-LW (Light Weight)

eSUN ePLA-Lite 1.75mm 3D Filament 1KG – eSUN Offical Store

Esun ePLA-Lite 1.75mm 3D printer filament 1kg Dimensional accuracy+/

eSUN PLA-LW Lightweight PLA 3D Printer Filament Low Density Strong Paint Adhesion 1.75mm 1KG Spool

Buy eSun ePLA-LW 1.75mm 3D Printing Filament 1kg-Natural Online at Robu.in

eSUN Red PLA+ Filament - 1.75mm (1kg)

Esun PLA - LW Light Weight 3D Printer Filament 1kg 1.75mm

eSUN PLA Luminous Blue - 3DJake International

Natural MH Build Series Lightweight PLA Filament - 1.75mm (1kg)

eSUN ePLA-LW 1.75mm 3D Filament 1KG – eSUN Offical Store

Natural MH Build Series Lightweight PLA Filament - 1.75mm (1kg)

eSUN PLA-LW Lightweight PLA 3D Printer Filament Low Density Strong Paint Adhesion 1.75mm 1KG Spool Foaming PLA Filament for 3D Printers 3D Printed Airplane

eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Cold White : Industrial & Scientific

eSUN 3D Printer Filament PLA+ 1.75mm Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Material For 3D Printers - AliExpress

eSUN eSILK PLA Filaments 1.75mm 1KG – INTSERVO 3D Printing Store