600 Watt Pure Sine Inverter Charger 12V ETL Listed to UL 458 ETA

This 600 watt pure sine inverter charger ETL listed and conforms to UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features and it is one of the most advanced […]
This 600 watt pure sine inverter charger ETL listed and conforms to UL 458 standards, is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 80%. It is packed with unique features and it is one of the most advanced inverter chargers in the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment. The AC/Battery priority and auto generator start functionality make it suitable to work in either backup power or renewable energy applications. When customized to Battery priority mode via a DIP switch, the inverter will extract maximum power from external sources and renewable energy systems, with only minimal battery cycles being required. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. When switching to battery priority mode via the DIP switch, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required. With the availability of the auto generator start, an electrical generator can be integrated into the system as a backup and started when the battery voltage goes low.

Get the most out of your equipment with the AIMS Power 1000W Pure Sine Inverter. It offers a continuous output pure sine wave with a 12V DC input. This item boasts a wide range of applications such as powering electronics using a car battery or other DC sources in the event of an electrical outage. A direct connect terminal block makes it easier to use. Enjoy superior efficiency with an optional power save mode. It also features a 35 Amp charger.

Aims Power PICOGLF10W12V120V Inverter Charger, Pure Sine, 1000W

AIMS Power 48-Volt Pure Sine Power Inverters

VOLTWORKS 600 Watts Pure Sine Wave Power Inverter 600w DC 12V to AC 110V 120V with Dual 2.4A USB Port & LCD Display Two AC Outlets for Car Truck RV Blue

30KW 30,000 PURE SINE POWER INVERTER CHARGER 300 VDC 208 VAC THREE PHASE - AIMS Power

5000-Watt 12-Volt Industrial Pure Sine Inverter

8000 Watt Pure Sine Inverter Charger 48 Vdc / 240Vac Input & 120/240Vac Split Phase Output ETL Listed to UL 1741

Take your favourite small appliances and electronics on the go by powering them in your car with the PowerBright 12V 600W Pure Sine Wave Power Inverter. This pure sine wave power inverter offers a 90% lower distortion rate and less than 3% harmonic distortion. Included in the inverter are a built-in cooling fan, two 3-prong 120V AC outlets and an anodized aluminum case that provides superb durability and maximum heat dissipation.

Power Bright Aps600-12 600 Watt Pure Sine Wave Inverter

Ultimate Power Pure Sine Wave Low Profile Inverter-Charger 600LP-CG

Ultimate Power Pure Sine Wave Low Profile Inverter-Charger 600LP-CG