eSUN 3D 1.75mm PETG yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque yellow

Buy eSUN 3D 1.75mm PETG yellow Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque yellow at
eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s Advantages of PETG: PETG is an excellent which combines the advantages of both PLA and ABS. Odorless; Little shrage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish. Specifications: 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 235C - 250C Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5 WARNING: This filament - when used for 3D printing - can expose you and others in the same room to chemicals known to the State of California to cause cancer. www.p65Warnings.ca.gov ALWAYS USE THIS PRODUCT IN A WELL VENTILATED AREA.

PETG 1.75mm 1KG ECO, DARK BLUE

eSUN PLA+ Filament 1.75mm 1kg (2.2lb) – INTSERVO 3D Printing Store

eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving

eSUN 3D 1.75mm PETG blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque blue

😀 【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG translucent

Polymaker PETG Filament 1.75mm, 1kg Strong PETG 3D Printer Filament Translucent Blue - PolyLite PETG Blue 3D Printing Filament 1.75mm, Dimensional

eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Black

【Easy to Print】High Speed PLA+ is an enhanced version based on ordinary PLA. It has higher strength and better toughness, not easy to break. Low

eSUN High Speed PLA+ Filament 1.75mm, 3D Printer Filament Speedy PLA Plus for Fast Printing, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D

eSUN 3D Printer PETG ABS+ Matte Filament 1.75mm 1KG 2.2lb Spool High Toughness

Polymaker US – 3D Printing Filament for your 3D Printer

PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing has all 2.85mm (3mm nominal, 2.85mm actual) PETG, For

eSUN PETG Filament 1kg (2.2lb) Spool 2.85mm

eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving

eSUN 3D 1.75mm PETG purple Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque purple

PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing has all 2.85mm (3mm nominal, 2.85mm actual) PETG, For

eSUN PETG Filament 1kg (2.2lb) Spool 2.85mm

New arrivals:HZST3D PETG Filament. Less Warping,Better Layer Adhesion,Bubble-Free. Tangle-Free:Full mechanical winding and strict manual examination,

3D Printer Yellow PETG Filament 1.75mm 1KG 3D Material Printing Filament (Fluo Yellow)

eSUN 3D 1.75mm PETG red Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque red

eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving

eSUN 3D 1.75mm PETG red Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque red