E360 12V Battery Monitor Kit

The E360 Battery Monitor (coulomb counter) is a sophisticated energy fuel gauge designed to tell the user the state of charge of a battery or battery bank. The battery monitor is simple to use by providing essential battery and power system information on a single screen without the need to toggle between screens. The battery monitor can be used on a 12, 24, 36, and 48 V bank. The energy capacity level is displayed as an amp-hour figure and a percentage. A run-time clock tells the user time until the battery bank is full while charging and empty while discharging. Power going in and out of the battery bank is displayed as Adc and watts. The voltage level of the battery bank is also shown. The display backlighting will slowly pulsate when the battery bank is in a state of charge, with more energy going into the battery bank than out. The backlighting will be solidly lit when in a discharge state with more power going out of the battery bank than in. There will be no backlighting, but the numbers will still be visible when the battery bank is balanced between charge and discharge. The battery monitor is easy for any user to set up for monitoring as there are only four figures to program within the setup screen. A complete installation kit will include a 500 A shunt, display screen, 35' of data cable, shunt mounting bracket, 22 ga positive wire, and an install template. The E360 Battery Monitor includes a 24 month limited warranty.
Always know exactly how much capacity you have left down to the exact hours, minutes and seconds. Measures voltage, current, and capacity in real time and shows power consumption and replenishment. Simple to program, easy to install. Works with LiFePO4, lead acid, gel cell, and other lithium chemistry batteries. Percentage of capacity Available Amp hours Runtime clock Measures watts Measures Amps Measures volts Included:  Battery Monitor display screen Brass power measuring shunt 35 ft data cable (connects shunt to screen) Aluminum shunt bracket Small, 22-gauge positive power wire

【For 9-100V battery bank】Suitable for 9-100V, 0-200AH battery bank. Auto recognition for different batteries, such as li-ion, LiFePO4, Gel, AGM, etc.

ECO-WORTHY 200A Battery Monitor, Easy DIY with Hall Sensor, 0-100V Battery Meter with Program, Auto Detection,for 12V/24V/36V/48V

Dakota Lithium BATTERY MONITOR & SOLAR INTEGRATION KIT WITH DL

Upfitters

【For 9-100V battery bank】Suitable for 9-100V, 0-200AH battery bank. Auto recognition for different batteries, such as li-ion, LiFePO4, Gel, AGM, etc.

ECO-WORTHY 200A Battery Monitor, Easy DIY with Hall Sensor, 0-100V Battery Meter with Program, Auto Detection,for 12V/24V/36V/48V

E360 BATTERY MONITOR KIT

EXPION360 LITHIUM BATTERIES - Total Battery

200A Battery Monitor with Hall Sensor for AGM and Lithium (LiFePO4

Expion360 Group 27 120Ah Extreme Density Lifepo4 Deep Cycle

Expion360 VPR 4EVER Platinum 120Ah Lithium Battery

Expion 360 BMS Battery Monitor 2X1.5

E360 Lithium Batteries and Tie Down TrayThe E360 Voyager 300 Ah Power Bundle includes three E360 100 Ah LiFePO4 batteries with a triple battery

E360 Voyager 300 Ah Power Bundle

VALKYRIE E360 Pure Black/White All-in-One water cooler 360mm CPU

Expion360 48V GC2 Lithium Battery – Campervan HQ

Victron Energy SmartShunt 1000A/50MV IP65

200A Battery Monitor with Hall Sensor for AGM and Lithium (LiFePO4