Searching for a way to jazz up your wall art? Attempt generating your very own Do it yourself acrylic frames for personalised 3D artwork. This write-up will walk you by means of exactly how I manufactured these in my property.
If you are on the lookout for a customized way to frame your pics or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the great matter.
I landed on these frames because I essential a very little a little something to include a little more pizzazz to my rest room wall. 
We decided to integrate my partner&rsquos adore of golfing into the combine by printing images he took of PGA golf courses he&rsquos performed in black and white.
I adore when artwork is a dialogue piece, so this was the great addition to the toilet wall.
To make it actually stand out, I produced these Do it yourself acrylic frames for each and every of the images.
Right here are the ways I took&hellip 
Desk OF CONTENTS
- one. Acquire your supplies.
- 2. Tape each facet of each corner.
- three. Mark where by you want to drill your holes.
- 4. Drill your holes.
- 5. Use your glue dots to safe your pictures to the body.
- 6. Mark the full on the wall exactly where you prepare to dangle it.
- seven. Use check my blog to mark the complete on the wall.
- eight. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- ten. Attach your frame to the standoffs.
- eleven. Revel in the completed products!
Disclaimer: This write-up does incorporate affiliate links for your comfort. This is at NO extra expense to you but earns me a modest commission. To read through additional, check out our disclosure coverage.
one. Gather YOUR Elements.
Very first points 1st, get all your components. All resources for all the things I employed are connected down below. I also bundled a list with inbound links of what we employed to hang the frames, too. 
FOR Generating THE Do-it-yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one particular for the measurement of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Tool (I applied a Sharpie)
FOR HANGING THE Diy ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
two. TAPE Each individual Facet OF Each CORNER.
Plexiglass/acrylic is incredibly delicate.
Since of this, you have to be pretty cautious when you are drilling the holes.
Placing a piece of painter&rsquos tape on both aspect the place you approach to drill your hole will enable retain the acrylic sheet from breaking or cracking when you drill.
I also kept the protective include on every single aspect of the piece, also.
3. MARK Where YOU WANT TO DRILL YOUR HOLES.
After you have positioned the painter&rsquos tape on all 4 sides (or having said that several destinations you approach to drill a gap), you can location a mark of the place you want to drill your gap.
I drilled my holes 1&Key in from each edge as you can see from the photo above.
4. DRILL YOUR HOLES.
In advance of actually drilling, double and triple check out that your marks are stage both of those horizontally and vertically.
You&rsquoll want to have these degree for when you hold them. 
The drill bit you decide on should be massive ample to allow the standoff to match in the gap.
I would do a check run on a piece of scrap substance to make guaranteed it is huge plenty of. 
Once you are particular that the marking are stage and the little bit is large sufficient, you want to start off drilling.
Listed here is a excellent video clip to abide by if you would like a demonstration on how to drill via acrylic.
You want to use about half electric power when you are drilling.
Slow and steady. If you go to rapidly, the acrylic will crack, so choose your time.
As you drill you need to see spirals of the acrylic slowly and gradually becoming eradicated. 
Repeat the drilling for every single gap you will need.
five. USE YOUR GLUE DOTS TO Protected YOUR Photographs TO THE Frame.
After your holes are developed, you can incorporate your photograph to the piece of acrylic/body.
The key here is to once again, make positive your image is stage just before you completely safe it to the body.
The glue dots are very sticky and don&rsquot permit for a whole lot of wiggle place, so it may perhaps be a superior notion to line up a piece of lined paper at the rear of the frame to enable you line the edges of your photograph.
No matter what trick operates for you to make confident the photo gets glued to the frame level will do. 
6. MARK THE Total ON THE WALL Where YOU System TO Cling IT.
As you begin to hang, mark your holes on the wall, but make certain your body is amount.
If you calculated effectively in the phase prior to drilling, the holes on your body must already be degree.
If you are hanging extra than a person frame like I did, make guaranteed every frame is degree in your grid, far too. 
7. USE YOUR PUNCH Instrument TO MARK THE Whole ON THE WALL.
I adore this device so a lot since it gets your gap begun and allows your drill to remain in location when you get started drilling.
If you don&rsquot have a person, I hugely suggest it!
8. DRILL YOUR HOLES IN THE WALL.
Be guaranteed to use a bit that matches the screws that arrived together with your standoffs.
This will most probably be a scaled-down little bit than the a person you employed on the frames.
I also employed a stud finder to see if I wanted drywall anchors, but because these frames are not that heavy, you could likely do without them.
nine. SCREW THE STANDOFFS INTO THE WALL.
As soon as you purchase your standoffs, you&rsquoll see how they operate.
In purchase for the picture to &ldquostand off&rdquo the wall, you have to safe the standoff with the furnished screw before attaching the image to the standoffs.
As you can see from the photo, making sure everything is level and measured the right way is tremendous crucial. 
ten. Attach YOUR Body TO THE STANDOFFS.
As soon as you&rsquove connected the standoffs, it&rsquos time to attach the images!
Line up the standoffs with your drilled holes and safe the standoffs.
If all goes effectively, anything will line up correctly and be prepared to go!
If you are like my father and I, you&rsquoll appear across at minimum a single that doesn&rsquot line up beautifully.
For this, we cheated a minimal little bit and secured the standoff to the body and utilised a glue dot to secure it to the wall, so it didn&rsquot go.
We only had to do this for two corners of two frames, but don&rsquot fear if you mess up a person&hellip We&rsquove been there! 
11. REVEL IN THE Finished Product!
Now it&rsquos time to appreciate your perform!
We did a grid of 9 complete images which was a significant undertaking with all the measuring, but I&rsquom in really like with how it turned out.
Permit me know in the reviews what you feel of the completed product or service!